PET Water Bottle Making Machine

PET Water Bottle Making Machine is a fully automatic bottle-blowing machine developed specifically for the production of various types of PET drinking water bottles.

Excellent energy utilization
PET Water Bottle Making Machine is equipped with a high-efficiency servo drive system, which consumes electricity only when in operation and has almost zero power consumption when idle. Compared with traditional hydraulic systems, the energy consumption of the whole machine is reduced by an average of 20%–30%.

Safety
The machine is equipped with self-locking safety devices in all key mechanical actions. When the process is abnormal, the system will automatically enter the safety mode to avoid personal injury and equipment damage.

Strong operational stability
Our product adopts a high-rigidity integrated frame and guide rail clamping structure, combined with a servo drive system, to achieve smooth movement and an error of less than ±0.1mm.

1. Start-Up Procedure
Begin by turning on the main power supply and activating the control panel. Access the operation interface to set essential parameters such as the heating temperature, blowing pressure (typically between 2.0 and 4.0 MPa), and molding time.

2. Mold Setup and Debugging
When installing or replacing the mold, carefully adjust its position to guarantee that the clamping line is fully closed without any gaps. After adjustment, run the machine empty to observe the movements, ensuring the robotic arm and all actions are synchronized and functioning correctly before starting production.

3. Automatic Production
Once setup is complete, start the feeding system to load preforms into the heating track. Monitor the infrared heating furnace to ensure the preforms are heated evenly and softened to the required state. The machine will then automatically carry out the feeding, blowing, cooling, and demolding processes, with the finished bottles transported to the collection area seamlessly.

4. Shutdown Procedure
To safely shut down the machine, first stop the feeding system and clear any remaining preforms from the equipment. Then, turn off the heating system and allow the temperature to fall below 80°C before cutting off the main power. Finally, clean any plastic residue from the mold surface and apply a rust-preventive agent to protect the mold during periods of inactivity.

PLC

Server System

Schneider Electric

Clamping Frame

Action Valve Festo

Turning Cylinder

Mould Guide Rail

Infrared Lamp

Bottled Water

Food Container

Medicine

Cosmetic

If you want to learn more about the PET water bottle making machine, pls contact us freely.